Monday, June 23, 2008

STEPHEN CAMP & MORE



A Comic Master Passes
Comedian George Carlin Dead At 71

***************************************************************

Have No Faith in Your Defensive Handgun Caliber or Load!

(Or Why I don't Get Involved in "Caliber Wars.")

By Stephen Camp

Very common in gun shop discussions, shooting magazines and books, as well as on the Internet are incessant discussions on "which caliber is the best". Also included will be questions and opinions on which load leads the pack for a given caliber. Some walk with extreme confidence as they have the latest version of this or that handgun and it's loaded with "nuclear" ammunition. Besides, whatever "expert" they subscribe to has proclaimed that this combination is "best", citing gelatin testing or whatever. Others look up "street stats" on how well or poorly a certain caliber/load has worked. Some simply trust the gun shop person's decision on ammunition selection and walk out secure in the "fact" that they are now capable of protecting themselves with the "best' ammunition money can buy.

I do believe that certain calibers and loads offer some advantages over others, but don't really think it will always be a visibly distinct advantage and not the difference between daylight and dark that some would have us assume. (I'm speaking here of calibers ranging from .38 Special from a 4" barrel, 9mm, and up. These have sufficient power to offer both adequate penetration and expansion from what I've seen.)

This .44 Special Corbon expanded nicely using a Hornady 180-gr. XTP. It is not so aggressive an expander as some JHP bullets. Corbon no longer uses this bullet. Some people equate "stopping power" or their pet caliber's effectiveness solely with expansion measurements. Is this the only factor to consider? Is this bullet actually less effective than one that expands to a wider diameter? Maybe…under some circumstances, but perhaps not in others.

Some have concerns about serious lack of penetration. Opinions vary as to how much is enough. Some subscribe to the "two holes is better than one" theory and go with the deepest penetrators they can find, often .45 ball. Others want expansion but at least (10, 12, 14", pick a number) of penetration. Very heated debates occur over such differences of opinion.

Here are my thoughts on the matter and I claim zero status as any kind of "expert". Neither am I a physician or pathologist. I am a shooter and a hunter. Take it for what it's worth and then you decide if there's any merit in what follows.

Over-Penetration: It is a concern, but one that is overrated in my view. So many shots fired in gunfights completely miss the intended recipients that I believe getting the hits in the first place should take higher priority. With FMJ or non-expanding loads, there certainly is the possibility of a bullet creating a through-and-through wound and possessing enough residual velocity to injure or kill another person. With most JHP's or expanding loads, should the target's torso actually be completely penetrated, the expanded bullet will have lost considerable speed. It will probably be less dangerous, but the heavy magnums like .41 and .44 could be exceptions. It is not unusual for pathologists to find expanded bullets inside the clothing near the exit wound when preparing the body for autopsy.

In his book, Gunshot Wounds, Dr. Vincent J.M. Di Maio reports that a 38-caliber LRN bullet requires at least 191 ft/sec to penetrate skin. He finds that the same bullet needs an average velocity of 280 ft/sec to penetrate two layers of skin and 6" of muscle as this is the average velocity lost when such penetration's occurred during testing. It seems reasonable that if we're firing a 9mm, .38, or .357 expanding bullet that doesn't expand, but still has around 300 ft/sec or so upon exiting the felon's torso, it is possible for it to injure an innocent bystander.

In the field, I witnessed a friend shooting a 35-lb. javelina with 230-gr. .45 ACP Ranger SXT from a 5" 1911. At his shot, the animal collapsed and sand flew behind it. Another buddy and I found the fully expanded bullet lying on top of the sand. This animal was shot broadside and is not as thick as an average adult human male. I've no doubt that had the expanded forty-five smacked another person that it would have raised a whelp, but I do not believe it would have injured anyone.

An officer under my command was required to shoot a felon. He hit the bad guy in the heart with a 9mm 124-gr. Hydrashok +P+. The bullet did not exit the body. Another officer I know was shot with a .40 180-gr. JHP from a Glock 22. It remained in his torso until surgically removed. Yet another officer was hit from the side with a .380 ACP 95-gr. FMJ. This bullet precipitated a gunfight. The bullet penetrated an arm, entered and traversed the heart/lung region, exited between the ribs and fully penetrated his other arm!

Believe it or not, the bullet traveled along the inside of his ribcage and did not damage anything vital! At the scene neither he nor I knew that and it was a pretty tense time waiting on the ambulance! I have no idea what residual velocity the 95-gr. bullet retained, but I'll bet it was not much. Upon being shot, he returned a shot from his 9mm Hi Power, but missed the felon! Which bullet was more dangerous to other folks in the area? Obviously, the round that missed its intended target was.

It certainly remains possible that over-penetration can occur, but with expanding ammo I'm not sure how likely it is to be capable of inflicting serious bodily injury. Again, the FMJ or solid bullets will almost certainly be the worst offenders in this regard. Gunscribe, Massad Ayoob, once wrote that about seven out of ten .45 ACP 230-gr. FMJ bullets exit the average adult male torso. I suspect that 9mm FMJ in 115 to 124-gr. exits more often.

If an expanding bullet fails to fully mushroom, it should be slowed down and present less threat of over- penetration. Di Maio notes that in penetrating two layers of skin and 6" of muscle, the 158-gr. LRN bullet lost velocity in the range of 214 to 337 ft/sec. The same weight/caliber SJHP lost 264 to 335 ft/sec. (Gunshot Wounds. Di Maio. Elsevier Science Publishing Company. P215.) He attributes this to the blunter shape of the expanding bullet when expansion does not occur.

Unless our target is naked or not wearing a shirt, coat, etc, there remains a chance that a bullet that does fully penetrate his torso might be captured in his clothing. Again, I think misses are far greater threats than over-penetrating bullets in most instances.

Misses are more dangerous to innocent bystanders than over-penetration in my view. I believe that we'd see better "stops" with better placement and present less danger to those around us at the same time.

If you use .41 or .44 Magnum, I do think the chance of dangerous over penetration exists as quite a few of the expanding bullets are designed for deeper penetration for hunting applications. I'd look at defense loads from Corbon or Winchester's Silvertip JHP's in these calibers. I understand that Speer has just introduced a Gold Dot hollow point for the forty-one, but have no information on how it penetrates.

Expanding ammunition in .38, .357, 9mm, .40, or .45 ACP is usually designed for either rapid or "controlled" expansion and geared toward defensive use rather than deeper penetration which is desirable in hunting rounds. Of these more commonly used calibers, the .357 does have some loads specifically tweaked to penetrate deeply as it is more frequently found in the hunting fields than 9mm, etc. I would avoid the use of JSP ammo in the defensive handgun for two reasons:

1. It frequently does not expand.

2. It will probably completely penetrate a human torso.

Adequate Penetration: It has been said that we want expansion but we need penetration. I believe this. The rhubarb seems to be over what is "adequate." At the same time, I do not believe that loads failing to achieve whatever is deemed adequate are necessarily inadequate or doomed to failure. Opinions range from 9 to 10" to the more popular view of 12 to 14". Some want no less than 16".

Let's take a look at this issue.

This 9mm Corbon 115-gr. JHP +P routinely penetrates approximately 9 to 10" in 10% ballistic gelatin. It is deemed a "failure" by some in the "stopping power" community. Is it? Others report it as an effective round with better street results than others which penetrate considerably deeper. Who is right?

The mandate for deeper penetration stems from those believing that the only damage done by a handgun bullet comes from the permanent crush cavity. In other words, the bullet damages only that which it contacts. They cite that at velocities below about 2000 ft/sec, the temporary stretch cavity's creation is neither violent nor large enough to cause any significant damage.

For the most part, I believe that this is true but do not immediately accept that the temporary cavity is meaningless. I believe that if two bullets penetrate the same distance and expand to the same diameters, the one producing the larger temporary cavity is probably more effective. The rounds may very well be equivalent if striking an area in which organs are elastic, but might have a bit of an edge if striking near an inelastic organ and cause some damage even without contacting it. The destruction from the temporary cavity would not compare with that from higher velocity rifle ammunition.

The 147-gr. 9mm Gold Dot on the left would be favored over the 115-gr. +P JHP shown on the right. The heavier bullet creates a smaller temporary cavity and expanded to smaller diameter than the faster 115-gr.

It also penetrates deeper. Which is best? One penetrates more deeply, but produces smaller overall diameter. This results in a smaller diameter crush cavity.

My personal preference is for ammunition that expands and penetrates approximately 12 to 14" in 10% ballistic gelatin. Having used such ammunition in hunting, I've seen pretty consistent results and made clean one-shot kills. Certainly the shooting of various wild animals does not correlate exactly with defensive handgun use, but I believe there is some correlation. I do not believe that the mechanism of collapse in a living, non-homogeneous, organism can be entirely predicted in the laboratory using gelatin.

At the same time, the collection of data on what has or has not "worked" is not the full answer, either. The reason is that we cannot ascertain how many of the "one shot stops" were for psychological vs. physical reasons. Did the bad guy stop because he had to or because he wanted to?

Ammunition penetrating less than 12" is probably quite effective when shooting aggressors head-on and when no intermediate barriers exist. It might not be so effective if one's required to shoot his opponent from the side where an arm is likely to be hit and more penetration's required to get to vitals like the heart or aorta.

I settled on the 12 to 14" range as I think this is the better compromise between a load that might penetrate too little vs. one that regularly punches 16" and probably exit the average human torso. Were I extremely concerned with over-penetration issues, I'd pick a rapidly expanding JHP that does 9 to 11" rather than some of the pre-fragmented bullets. Bullets penetrating 12 to 14" should suffice in most scenarios whether shooting is face-to-face or from more oblique angles without excessive penetration. I am willing to accept a bit smaller expanded bullet diameter to achieve this.

Realistic Expectations: I think this is where we go astray; we expect way too much from our handguns. Hunters have known that seemingly equivalent shots on similar animals can produce very differing results. One may instantly drop while the other runs, yet both received lethal hits to the heart/lung area. This is so often seen that's it's accepted. Deadly force scenarios for most of us are much rarer and there are folks interested in self-protection that have no experience in hunting; they have never seen anything shot. They have never seen a deer with a shredded heart run a hundred yards. They have seen shoot-em'-ups on television and movies. Many of us do not have the proper "respect" for what adrenaline can do and most have not witnessed the damage a person on PCP can withstand and just keep going!

If a 150 pound deer can be shot through the heart with a .30-06 180-gr. expanding bullet at 2700 ft/sec and keep moving, should we expect that a 200 pound human hit with a 180-gr. expanding forty-caliber bullet at 975 ft/sec to be instantly incapacitated?

I believe it's an unrealistic expectation to assume that any defensive pistol cartridge will deck a human being as though struck by lightning. It will happen on some occasions, but not all and probably not the majority.

Many consider the .45 ACP 1911 a premier defensive handgun. I sure do, but only if one can shoot it accurately. This requires practice. There is truth in the statement that a hit with a .22 is better than a miss with a .44! If you don't shoot the .45 as well as another caliber or if you don't feel comfortable in carrying cocked-and-locked, a different caliber and action are legitimately called for.

The high-velocity rifle bullet doesn't always stop the game animal even with good hits, but normally the animal will not run as far before dying as when hit with an arrow. Even though hemorrhaging severely, they can go surprising distances if too quickly pursued. Adrenaline and the will to live push them beyond what many consider possible.

I submit that pistol bullet impact is more akin to the effect of the arrow than the centerfire rifle bullet.

In a life-and-death struggle, seconds seem like hours. The good guy has been forced to shoot the felon, but nothing happens despite a good hit. He shoots again and again and again and finally the bad guy drops. The actual time frame may have been but a few seconds, yet to our survivor, his handgun/load seemed not up to the job. None of them are in my opinion. Some are better than others, but none smite like the Hammer of Thor and it's simply not realistic to expect it. It could also be dangerous. Expect a failure and be mentally prepared to deal with it. Expect that multiple shots may be necessary to actually stop a determined aggressor.

Increasing "Stopping Power": Easy to say, but harder to do under stress is getting the hits. The hunter doesn't simply shoot at the animal's body; he strikes at the vitals. I submit that we must do the same thing, but have very compressed time frames in which to do it! Some say this is not possible and is an unrealistic expectation. I say "it is what it is" and that placement is power. There are torso hits and there are good torso hits. A bullet through but a lung gives the aggressor a case of walking pneumonia and is not a sure stopper unless he is devastated mentally. I doubt that any of us want to count on that. A bullet that cuts the aorta or pierces the heart is quite something else. It may not instantly stop him, but the clock is ticking and his conscious time will usually be measured in seconds rather than minutes.

Pick the load/caliber/handgun you want, but without the ability to place your shots at speed, do not expect it to "stop" quickly. Even if you can make quick, accurate shots do not place too much faith in your gun, caliber, or load. You can do everything right and still not instantly stop your attacker. The handgun simply doesn't have enough power. We use them because they are convenient and able to be with us when attack is not expected.

Firearm trainers have indicated that the long arm is much to be preferred to the handgun for defense. They're not speaking only with regard to the ease of accuracy, but to the increase in power. Unless the brain or central nervous system's damaged, we need the rifle to do what we expect the pistol to.

To increase your odds, I suggest the following:

1. Select a handgun in at least .38 Special or 9mm and base that selection on reliability and how well you personally shoot that weapon, be it revolver or semiauto. Use one that you are comfortable with. It doesn't matter if it's double-action S&W or a Browning single-action automatic. What matters is if you can get the hits with it and are comfortable using it.

2. Learn what you can from serious researchers in bullet performance and make your decision on a carry load, but be sure that it is reliable in your handgun.

3. Practice.

4. Practice.

5. Practice.

The "practice" part is too often neglected. Having the "best" gun and ammo is not nearly all of the solution. Competence with it is essential. Practice routinely and if necessary get training.

If what works for you is a double-action revolver, go for it. If you shoot .38's better than .357's, use that caliber. Hits count. Don't be as concerned with having "only" six shots vs. 8 or more. I think we run out of time before ammunition. A good hit or two with the .38 is better than a poor hit or miss with a .45 or .357 SIG, etc.

If you shoot a forty-five as well as a 9mm, go with the former, but do not expect it to be vastly superior to the nine. With equivalent hits, I doubt that much if any difference will be seen. If one does better with the 9mm, I'd cast my lot with it. Once you have a caliber capable of adequate penetration and expansion, placement is power.

************************************************************************************************

Mossad Chief Empowered to Prepare Groundwork for Iran Strike

DEBKAfile Exclusive Report

June 23, 2008

Meir Dagan appointed to seventh year as Mossad Director

Meir Dagan appointed to seventh year as Mossad Director

By extending the Mossad director, Meir Dagan’s tenure for another year until the end of 2009, Israeli prime minister Ehud Olmert has put in place a vital constituent for a possible eleventh-hour unilateral strike at Iran’s nuclear facilities.

In his six years on the job, the 61-year old external intelligence has proved his covert mettle in a variety of counter-terror operations, graduating most recently to a highly successful intelligence coup leading up to the demolition of Syria’s North Korean plutonium reactor in al Kebir last September.

Appointed by former prime minister Ariel Sharon in 2002, Dagan’s first four years as the Mossad’s tenth chief were dedicated to counterterrorism rather than tracking Iran’s nuclear activities or monitoring Iran’s burgeoning strategic ties with Syria and Hizballah.

From mid-2006, the former general shifted the agency’s priorities to include these targets, while the Mossad continued to show its fearsome counter-terror paces in Damascus, Beirut and other Arab capitals.

Not all the Mossad’s operations have seen the light of day, but it has been credited in the past two years with hits against high-profile Hizballah, Hamas and Jihad Islami operatives in Syria and Lebanon.

The operation against Syria’s plutonium reactor last year was one of the most complex operations ever performed by the Mossad. For the Israeli raiders to put the facility out of commission and lift out the evidence of a working nuclear collaboration between Syria, Iran and North Korea, they needed from the Mossad precise data on the facility’s inner and outer defenses. It had to include the air defense systems in place across Syria, the whereabouts of the materials and equipment the Israeli team was assigned to appropriate from the site and transfer to the United States, and the nature and numbers of the Syrian, Iranian and North Korean personnel present.

It was not until April 2008, seven months later, that the US Central Intelligence Agency released news of the operation in Washington, providing graphics attesting to the depth of Mossad’s penetration of the of the most secret and well-protected facility in Syria.

Examination of those visuals attested to one or more agents having been planted solidly enough in the Syrian nuclear project to have photographed the different stages of the reactor’s construction and the North Korean equipment installed there – a feat which drew the respect of Dagan’s undercover colleagues in the West.

The other outstanding feature of the Al Kebir operation was one that has come to be associated with the spy chief’s method of operation: No leads or clues were left for the Syrian, Iranian and North Korean investigators to find –even after the photos were published.

His spy or spies proved untraceable.

Dagan, a hands-on spymaster, demonstrated this skill earlier in the operation to eliminate one of the longest-running and most dangerous enemies of Israel and America, the head of Hizballah’s special security apparatus, Imad Mughniyeh, in Damascus on February 12. It followed similar methods in the preceding two years - usually explosives planted under a driver’s seat or headrests of vehicles driven by Hizballah, Hamas and Jihad Islami operatives. Neither Hizballah nor Syrian intelligence has been able to prevent these liquidations or catch the hit-teams.

The intelligence operation for aborting Iran’s aspirations to acquire a nuclear bomb would undoubtedly ratchet up the Mossad’s targets for its most formidable mission ever. It would be undertaken in the full knowledge that a nuclear bomb in the hands of the Islamic Republic of Iran would constitute the most dangerous threat to Israel’s survival in 60 years of statehood, as well as a menace to the free world.

It would be up to Meir Dagan, a Holocaust survivor born in the Soviet Union, to rise to the Mossad’s motto: "Where no counsel is, the people fall, but in the multitude of counselors there is safety" (Proverbs XI/14)

The Mossad chief has his critics at home. In Israel’s clandestine agencies, some find his style excessively individualist, secretive and highhandedly confined to fields which he finds interesting rather than objectively important to national security. He is faulted with shunning the close collaborative relations traditional in the undercover world. The Mossad’s structure is also said to be antiquated and in need of an extensive overhaul, although it recently launched a website for recruitment.

But Dagan has the full trust of his boss, the prime minister.

The timing chosen for extending the Mossad chief’s tenure – early summer of 2008 – is indicative. Israeli intelligence estimates the summer months are critical for acting against Iran’s nuclear advances, especially uranium enrichment which Iran refuses to forego. If it is not stopped by September or October of 2008, it will be too late; Iran will have crossed the threshold to the last lap of its military program.

Israeli intelligence and its armed forces have three months to finish the job which has long been in preparation.

************************************************************************************************

rense.com
Cell Phones Damage Eyes
And Entire Visual System

From Dr. Gayle Eversole, PhD
Leaflady.org
6-23-8

It is interesting to note that there is a question on the HAM Radio operator's license exam that aks about causes of cataracts. EMF is the answer. And this question has been on the test for decades.

Also note -


"2. Microwave phones can make kids vision-impaired. Microwaves cause eye lens opacity similar to cataracts. In the 1970s, researcher Milton Zaret demonstrated that weak microwave fields cause debilitating subcapsular eye lesions, sometimes years after exposure.(12) Israeli researchers have confirmed that microwaves at cell phone intensities cause macro and micro damage to the entire visual system, including tiny bubbles that can form on the eye lens.(13) Dr. Om Gandhi at the University of Utah reported that the eye lens of a 10 year old child will absorb five times more cell phone radiation than an adult eye.(14) Metal-rimmed eyeglasses can absorb microwaves, then re-emit that radiation onto the eye surface.(15)"


************************************************************************************

China supplying Iraq insurgents
Body armor superior to what U.S. forces have

***************************************************************************************************************************************

June 19, 2008

Senate Housing Bill Requires eBay, Amazon, Google, and All Credit Card Companies to Report Transactions to the Government

Broad, invasive provision touches nearly every aspect of American commerce.

Contact: Adam Brandon
Phone: (202) 942-7698
Email: abrandon@freedomworks.org

**************************************************************************

http://www.z-medica.com/quikclot/index.asp

www.thetrumpet.com

www.staceydean.org


tennysonroneryendorsement.png

Saturday, June 21, 2008

STEPHEN CAMP 1911 PISTOLS & MORE

UPDATED SUNDAY - JUNE 22, 2008

I WANT YOU TO READ MY BLOG AT

www.actionsbyt.wordpress.com

***********************************************************

WHERE TO BUY AMERICAN GASOLINE. THIS IS VERY IMPORTANT TO
KNOW. READ ON.

Gas rationing in the 70's worked even though we grumbled about it.
It might even have been good for us!

Are you aware that the Saudis are boycotting American products? In
addition, they are gouging us on oil prices.

Shouldn't we return the favor? Can't we take control of our own
Destiny and let these giant oil importers know who REALLY generates
their
profits, their livings? How about leaving American Dollars in America
and
reduce the import/export deficit?

An appealing remedy might be to boycott 'their' GAS. Every time you
fill up your car you can avoid putting more money into the coffers of
Saudi
Arabia .
Just purchase gas from companies that don't import their oil from
The Saudis. Nothing is more frustrating than the feeling that every
time I
fill
up my tank, I'm sending my money to people who I get the impression want
me, my family and my friends dead.


*The following gas companies IMPORT Middle Eastern oil:*
Shell.................................... 205,742,000 barrels
Chevron/Texaco.................. 144,332,000 barrels
Exxon /Mobil...................... 130,082,000 barrels
Marathon/Speedway.......... 117,740,000 barrels
Amoco.................................. 62,231,000 barrels
And CITGO oil is imported from Venezuela by Dictator Hugo Chavez
who hates America and openly avows our economic destruction! (We pay
Chavez's
regime nearly $10 Billion per year in oil revenues!)

The U.S. currently imports 5,517,000 barrels of crude oil per day
From OPEC. If you do the math at $100 per barrel, that's over $550
million PER DAY ($200 BILLION per year!) handed over to OPEC, many of
whose
members are our confirmed enemies!!!!! It won't stop here - oil prices
could
go
to $200 a barrel or higher if we keep buying their product.

Here are some large companies THAT DO NOT import Middle Eastern
oil:
Sunoco....................... 0 barrels
Conoco........................ 0 barrels
Sinclair....................... 0 barrels
BP / Phillips............... 0 barrels
Hess. .......................... 0 barrels
ARC0.......................... 0 barrels
Maverick.................... 0 barrels
Flying J. .................... 0 barrels
Valero......................... 0 barrels
Murphy Oil USA........ 0 Sold at Wal-Mart , (gas is from South
Arkansas and fully USA owned/produced.)
Not only that, but they give scholarships to all children in their
town who finish high school, and are legal US citizens..

*****************************************************************

Lightweight 1911 Pattern Pistols

By Stephen Camp

I am not going to get too bogged down in what does or does not constitute a 1911 pattern automatic in this article. For this work, it will mean a single-action semi-automatic pistol whose lineage from the full-size all steel 1911 is apparent. The lightweight can be a full 5" gun, a Commander-size, or one of the more compact versions sporting a 3 or 3 1/2" barrel.

This piece will explore why these pistols have a following, shooting observations, as well as special "problems" that may crop up with the aluminum-frame pistols. (Polymer-frame guns are not discussed.) I will also give my own subjective views on both their strong and weak points.

It is a fair statement that Mr. Browning's 1911 remains a popular gun after many handguns designed after its birthday have faded from the shooting scene. I strongly suspect that more 1911 pattern pistols are produced domestically than any other American-made handgun. This might not be true worldwide, but I'll bet a sizeable percentage of non-US handgun owners have them…or would if they could.

Not surprisingly there are several variations on the 1911 theme and lightweight versions with aluminum frames are but one.

This Springfield Armory 5" Lightweight has an aluminum alloy frame. This one was fitted with a Ed Brown grip safety several years ago. Since that time dimensional changes call for a 0.220" radius rather than the 0.25" required for most. It has a Brown sear and hammer and an STI trigger. Anti-skid tape covers the front strap. Being an older version it also has the more squared off front grip strap. Of my lightweight 1911's, this one sees the most use. The 1911 pattern pistol in lightweight form can be a pretty useful item. Are they essential? Probably not, but they are nice for some purposes or circumstances.

Why a Lightweight? This is a good question and I'll give my observations and best guesses. It seems that the more popular handgun models eventually do come out in a lighter version. If a handgun is popular, it seems that many manufacturers will offer it in several variations to get as much of that market share as possible. Advertising always stresses a particular gun's strong points but never the weak. (We'll look into some of the problem areas a bit later.) Advertising can be geared to helping a potential buyer "believe" that they really do "need" this version of the gun in question. Many of the newer handgun models stress lightweight. Look at the ultra-light S&W revolvers, the scads of lightweight polymer-frame pistols, as well as the continuation of aluminum frame standards like the Colt Commander, SIG-Sauer service handguns, as well as Glocks. All of these use frame materials lighter than traditional steel.

So am I saying that gun makers are creating a false need to increase sales? Not necessarily, although the main focus of any company rests at the bottom line. They want to stay in business and need sales to do this. If essentially the same gun as an all-steel one can be made by simply substituting aluminum alloy for steel, they can offer at least one other variation on a successful theme with relatively little R&D or start up costs.

The more compact lightweights include the Colt Defender (left) and the mainstay Commander on the right. Many do not consider 1911 pattern pistols smaller than the Commander to be true 1911's and reliability issues are frequently cited. While it's no secret that I personally own no 1911 pistols smaller than the Commander, more than a few folks tote such diminutive forty-fives as the Defender. For this article the important factors concerning its special "needs" compared to all-steel guns are the same.

I will offer my opinions as a shooter and former police officer on the role of the lightweight handgun in general and the 1911 pattern pistol in particular.

We frequently hear that the only thing the lightweight 1911 does is to carry easier. While it is true that they are lighter, for myself they seem to be quicker from the holster to the first shot! It seems that they just get "on target" quicker for me…for the first shot which very well might be the most important in self-defense scenarios.

There's not much way around there being more felt recoil in a lighter pistol of the same type. (The LW 5" SA weighs about a half-pound less than its steel frame counterparts.) The interesting thing is that it makes no difference in speed if firing one shot on one target and moving to another. The gun doesn't have to be down in from recoil before moving to another target. I verified this with a timer using myself and a friend as guinea pigs. There is a slight increase in the time between individual shots on a single target. This proved true for both myself and my friend, who is extremely quick. So, if in a shoot-out situation and you engaging multiple targets, we probably won't see a difference in time between a single hit on each. If one requires a second or third shot, the split goes up (slightly) and translates to a tiny bit slower response time for secondary targets. I do not remember the exact times but it seems that there were but a few hundredths of a second difference. How much of a factor this might or might not be in real life I leave for each of us to decide based on our own experiences and perceptions.

Problems with Lightweight 1911's: The aluminum frame 1911's are nice to carry despite a bit more actual felt recoil when firing, but to have this we also inherit a few problems. Some are easily overcome and one might be impossible to totally eliminate. Let's talk about it first.

Longevity: This is usually the reason cited for not owning a LW rather than all steel 1911…and there is some truth to it. The aluminum frame guns probably do not hold up to as many rounds as the steel frame ones. The question is how many is "many"? If you shoot perhaps 100 full-power rounds per month through your LW, that would be about 1200 per year. I've heard estimates suggesting that the LW is good for 15 to twenty thousand rounds before the frame will crack. I have no idea if this is true or not, but assuming that both are "good numbers" and pick one in the middle at 17,500 rounds. Doing the math indicates that our pistol should be good to go for over 14 years at 100 full-power shots per month. This assumes that the recoil spring is changed when needed. I honestly believe that using a bit stronger recoil spring and a shock buffer can significantly extend the useful life of the LW aluminum frame. This would cushion the impact transferred from the steel slide to the aluminum frame via the flange on the recoil spring guide. The factory standard recoil spring for the full size 45-caliber 1911 is 16 pounds. I use an 18.5-lb spring with no problems and I also use a shock buff. If you are concerned with either or both causing malfunctions, why not just use them at the range and then revert to the factory standard recoil spring and no buffer when carrying for serious purposes? Mine stays set up with the slightly heavier spring as well as the buffer as this combination has caused me absolutely zero problems in my guns. The same might or might not be true in others.

I believe that using the polymer buffer along with the slightly stronger 18.5-lb recoil spring extends the life of the aluminum alloy frame. Others disagree. I suggest that if you have reliability concerns, use the slightly heavier spring…or at least the buffer for practice and remove when you clean the pistol before carrying.

I do not subscribe to the theory that the 18.5-lb spring damages the gun when it "slams" the slide forward. The 5" Delta Elite fires the 10mm and uses even heavier springs. If you do, just use the 16-lb. spring and a buffer when practicing.

The relatively few lightweight frames I've seen cracked have been on Colt Commanders and most eminate from the hole through which the slide stop passes…or are in that immediate area. Frequently drilling a small hole at the end of the crack can stop its continued growth. Of course this looks like hell.

I don't think the LW 1911 pattern pistol is best served with +P ammunition in .45 ACP. Assuming equal bullet weight, the +P round should translate into that bullet being pushed faster than the standard velocity one. That translates into the slide being driven rearward harder when the gun is fired. It also means more felt recoil. For the lightweight pistols I suggest standard velocity ammunition. If a person is bound and determined to use +P, I suggest using it only for ocassional practice (with a buffer) and then as a carry load if that is intended. My own lightweight 1911's use standard pressure ammunition for carry and the handloaded equivalents for practice.

The LW 1911 might not have the longevity of its all-steel brethren, but neither is it waiting to just crumble, either. A little prevention and common sense should allow a shooter to do quite a bit of shooting with one with no problems.

Feed Ramps: On many of the lightweight 1911 pattern pistols the feed ramp will be the traditional setup in which the frame provides the lower portion of the system. Aluminum is softer than steel. It will dent and gouge easier and is usually covered with a hard finish called anodizing. This protects the aluminum alloy and should not be removed. Bare aluminum can be damaged fairly easily if bullets with sharp edges are used and particularly so if the magazines used don't angle the bullet upward. If the cartridge "dips" or hits the ramp straight on as it is stripped from the magazine, even an anodized ramp area can eventually get pretty dinged up.

In my experience, ammunition having rounded edges around the bullet's meplat or hollow point is not harmful to the aluminum lightweight 1911 frame portion of the feed ramp. (L-R: Handloaded 200-gr. CSWC, handloaded 230-gr. FMJ FP, Winchester 230-gr. Ranger JHP, Winchester 230-gr. FMJ.)

Magazine followers can wreak havoc on an aluminum frame gun's feed system. If the follower is free to move forward past the front of the magazine tube as the last round is stripped and chambered, it can cause dings in the ramp. Fortunately these are usually below where the bullet initially contacts it but the problem can be avoided altogether. I suggest using only magazines in which the follower design does not allow it to possibly move out of the magazine body and contact the ramp. Examples would include some of the old Randall magazines as well as Wilson and Tripp magazines.

Here is the wear apparent on my moderately used SA Lightweight 5". Note the dings toward the bottom of the ramp. Traditional magazines caused these. Their followers could contact this portion of the feed ramp. The wear at the top is just from use. Using a magazine with a "captive" follower as shown by the Tripp follower in the Randall magazine at the right eliminates damage to the ramp from the follower. It should be noted that not all traditional magazines having the "non-captive" followers cause problems, but I've seen enough that I don't use them in the lightweight aluminum frame 1911's.

The magazine followers on the left and middle should work fine with the LW 1911. The one having the traditional follower (right) could damage the feed ramp. It is my understanding that current versions of the SA 5" lightweight have a one-piece steel ramp to completely eliminate potential damage.

Plunger Tube: Aluminum is simply softer than steel and a vital part of the 1911 is staked to the frame. Of course this is the plunger tube. It simply holds the spring-loaded plungers that tension both the slide stop and the thumb safety. If too much up/down pressure is applied to the plunger tube it can become loose. Its legs are steel and extend through the aluminum frame where they're flared on the inside. Too much force can let these legs wallow out the holes they're in and the tube no longer is stationary. Depending upon how loose it becomes, it can allow differing amounts of pressure to be applied to the slide stop and/or the thumb safety. The main cause I've seen for this malady is apply too much force to the slide stop plunger when reinserting the slide stop when reassembling the pistol.

The spring-loaded plungers tensioning both the slide stop and the thumb safety can be seen protruding from the plunger tube, which is staked to the aluminum frame. If the front plunger extends outward too much to somewhat easily allow the slide stop to seat that you retract it a bit. Don't just force the slide stop into place. That is guaranteed to eventually loosen the plunger tube and has the potential for severely degrading reliability.

Conclusion & Observations: I like lightweight 1911 type handguns. I lean toward the 5" gun but have no arguments against the 4 to 4 1/4" Commander size versions. They allow for very comfortable concealed carry of a relatively potent full size defensive arm. They can stand considerable shooting but will not handle the extreme amounts that the steel frame guns can in all likelihood.

Were I only going to own one 1911, it would not be a lightweight. I am a shooter and folks reading this probably are too. Were I going to own a couple of 1911 forty-five's, one very well might be a lightweight.

I see these as filling a specific niche for the handgunner as either an exceptionally easy gun to carry concealed or even as a backup that is the same as his primary except for its weight.

This SA Lightweight 5" is a favorite .45 ACP 1911, but it would not be my choice were I going to own but one 1911.

They do bring special concerns for maintenance but it is not difficult to meet these specific needs. I believe that they are great guns for specific purposes.

************************************************************************************************

FROM www.survivalblog.com

Ten Tips to Save Money on Ammunition, by Mr. Yankee

As prices increase, many shooters are looking for ways to take the bite out of their shooting budget. Here are ten tips to help:
Take the bite out of your shooting budget:

If you are like most, you did not buy nearly enough ammo over the past few years. Most of us told ourselves that our budgets just couldn’t be stretched any farther. So our ammunition reserves either dwindled or stayed static despite knowing that prices were rising. Boy are we sorry now! Anyone who was not paying attention had a severe dose of sticker shock when hunting season arrived, and it is just getting worse. This is not an “I told you so” piece despite my advice to stock up on ammo in articles from late 2006 and early 2007. This is a warning about what is coming next and what you can do about it. It is too late to buy cheap ammo. You will never see brass cased, Boxer-primed 308 of good quality for under $200 per thousand again. You will never again see even steel cased 7.62x39 to feed your $99 SKS for $99 per thousand. You will never again see 9mm Luger (Parabellum) for $12 per 100. Not only has the price of factory loaded ammunition soared, the price of reloading components have begun to climb as well. What can you do? Here are 10 steps you can take to offset some of the financial bite in your shooting budget.

#1) Shop wisely - use the Internet and toll free phone numbers to research current prices and comparison shop. Information is power; use it to your advantage. Some sites raise prices more slowly than others. Some include shipping in their prices. Be sure that you are matching apples to apples when comparing prices and factor every penny including shipping and sales taxes when you are making mail order purchases.

#2) Watch for retail bargains at local stores. If your local gun shop or back country general store has an odd box of cartridges or shotgun shells with a five year old price sticker on it. Buy it. The price of ammo has literally doubled in the last five years. Even those last few dusty corners will be cleaned out soon. If you can take advantage of a ‘first in last out’ inventory system, do it before someone else does. Every once in awhile the larger stores like Dick’s and Wal-Mart will run ammunition sales with discounts on case quantities that still seem reasonable. If you see a good sale, stock up! [JWR Adds: Also look for ammo that might still be available pre-inflated prices at on table of private sellers at gun shows. When you do find a bargain, be sure to ask "Do you have any more of this elsewhere?" Look for ammo at garage sales, and estate sales. It might even be worthwhile to place a "want to buy" ad if there are free or low-cost classified ads in your area.]

#3) Roll your own. Reloading has long been a means of saving a few dollars as well as improving the quality of loads tweaked for your rifle. Despite the recent increase in the cost of reloading components, you will still pay less for ammo you load yourself than for off the shelf factory loaded ammunition. The price of reloading components and equipment have begun to climb as the cost for materials and interest in reloading have increased. The prices will climb higher. So now is the time to buy. If you shoot on a regular basis, your savings from reloaded ammo quickly offset the investment in reloading equipment. This is especially true if you pick up a used press. Classified ads and estate sales are the places for buying reloading equipment. A good quality press like the RCBS Rockchucker can frequently be found for less than 50% of the retail price for a new press and will have several decades of hard use left in it. I recommend that you start watching for used reloading gear.

#4) Buy used. Not only can firearms and reloading tools be found at bargain prices, many an old hunter was an avid reloader who left behind a bench full of components when he met the Lord. I’ll happily pay for partial boxes of projectiles, primers, or powder (in the original containers) and make use of those components building my own loads. If you happen to run across full or even partial boxes of factory loaded ammunition at gun shows, garage sales, or auctions you may be able to get it at a fraction of the retail cost as well. But use caution. Never, ever shoot reloaded ammunition of unknown quality. You are literally gambling your life if you shoot someone else’s reloads. There are very few people who I trust my life to. I am just not willing to pull a trigger on a cartridge that might be unsafely loaded.

#5) Stock up! It is too late to get the bargains that were available a few years ago. But it is not too late to stock up before further price increases, taxes, tariffs, and out right import bans. Despite the current market price: buy primers, projectiles, and powder while it is still legal and anonymous to do so. A day is coming when you will need a permit to buy powder. I think it will be within our lifetime. Buy 22 rim-fire cartridges. You can’t reload them, so stock up on them for you and for the next generation. It is prudent to stock up on anything that you use regularly, even without waiting for a sale discount. With inflation at over 10%, “investing” in assets like food and ammo has a better return than the stock market. Plan ahead. Don’t buy just for this weekend or this season. That is the thinking that got you wishing that you had more ammo on hand. Prices are going to continue to climb. Buying in bulk now will generate savings over the long term.

#6) Make your shots count. "Spray and pray" is neither tactically nor economically sound. Make your plinking sessions count. Aim every shot carefully. When testing new reloading recipes, test small batches for signs of pressure and accuracy. Try three or five round test batches instead of ten or twenty round batches. The same is true for sighting in a new scope or a new rifle. Check the target every second shot instead of after each full magazine.

#7) Retool. If your chief reason to plink is for backyard entertainment, consider swapping out of centerfire ammunition to 22 rimfire or even a low cost pellet rifle. Another option is the kits that convert your rifle or pistol to fire 22 cartridges. Shooting a more economical cartridge may pay for the cost of a [.22 LR] conversion kit or a new 22 rifle in as little as a single weekend’s shooting. By way of example, if you shoot 500 cartridges of 22 long rifle (at three cents each) over the course of a weekend instead of 500 cartridges of 308 (at 53 cents each). You save a whopping $250! Just let that sink in for a moment. Plinking with a 22 instead of a 308 saves two hundred fifty dollars every 500 trigger pulls. Wow! That adds up fast and the savings won’t stop with the first $250. It will continue for every similar shooting session you have in the future.

#8) Make use of your skills. Let your investment in shooting sports generate savings in other budgets. Put meat on the table. Moose, elk, mule deer, white tail, pronghorn, turkey, geese, hares, rabbits, pheasant, duck, partridge, squirrel – all are tasty and every bite on your plate saves money out of your grocery budget – especially if you learn to dress and butcher the game yourself. Besides the financial savings, you’ll have a sense of pride like little else when you know that the freezer is full and you have all the jerky you can eat because your hunts have been successful.

#9) Waste not. With scrap metal selling at or near the all time high, don’t waste the byproducts of your range time. Even if you do not reload your cartridge cases or shell hulls, someone else might be willing to pay for the chance to reload them or as salvage. Keep this in mind when you shoot Berdan primed brass. I have been unable to locate a current US retailer of Berdan primers, but that may change in the future. Even steel and aluminum cartridge cases have value as scrap and of course the lead itself can be reclaimed to smelt and mold into new musket balls, bullets, and shot, as well as being sold as scrap metal. It may seem like more work than it is worth, but remember that the prices are climbing and the sand bank behind your favorite target may already hold several hundred pounds of lead.

#10) Fight back. Be vigilant. Be proactive. Vote against new tariffs, taxes, and bans. Vote against candidates who restrict your freedoms, raise license fees, and create access permits or talk about doing so in the future. Encourage and educate not only your friends, co-workers, and neighbors, but also the next generation so that they will do the same. We may not be able to stop the global forces aligned against our shooting sports but if we work together, we might just slow them down long enough to preserve the sport and keep it affordable for one more generation. - Mr. Yankee

************************************************************************************************

http://www.z-medica.com/quikclot/index.asp

www.thetrumpet.com

www.staceydean.org



Aerial photo of the Temple Mount in Jerusalem showing the Proposed Northern,
Central and Southern Sites for the First and Second Temples.

************************************************************************************************

HK P7

HK P7 pistols can be drawn, cocked, and fired accurately faster than any other pistol. The unique HK cocking lever allows the P7 to be carried safely with a round in the chamber, yet it is ready to fire by the natural tightening of the fingers around the grip. Releasing the cocking lever decocks the P7 immediately and renders it completely safe.

P7 pistols have a constant, uniform trigger pull for all rounds fired. There is no heavy first-shot trigger pull like that found on a conventional double-action pistol. There is no change in trigger pull between critical first and second shots. A simple three-dot sighting system makes aiming almost instinctive. And all P7 pistols are completely ambidextrous.

To ensure accuracy, P7 pistols use a fixed, polygonal barrel made by cold hammer forging. Polygonal rifling seals propellant gases behind the bullet and increases barrel life. With its fluted chamber, the P7 will extract and eject an empty shell even if the extractor is missing. The extractor, which doubles as a loaded chamber indicator, only aids in making extraction smooth and uniform.

The P7 gas system retards the movement of the recoiling slide during firing and eliminates the need for a conventional locking mechanism or heavy slide. A low profile slide contributes to the balanced center of gravity and overall compact size of the P7. Made of high grade steel, the low profile slide keeps the recoiling mass as small as possible. Combined with the optimal grip angle of 110°, the result is an accurate, low recoil pistol suited to the operational requirements of demanding users.

Using the potent .40 Smith & Wesson cartridge, the P7M10 was developed especially for law enforcement and civilian shooters searching for an effective combat handgun that fires a more powerful type of ammunition. The .40 S&W round matches the ballistics of the 10mm cartridge designed for the Federal Bureau of Investigation. Identical to P7 9mm pistols in operation, the strengthened P7M10 delivers ballistics approaching that of a .45 ACP pistol. Available in nickel or blued finishes, the M10 safely carries eleven rounds, 10 rounds in the magazine plus one round in the chamber.


************************************************************************************************

NEW BENCHMADE ASSISTED OPENING - RECOMMENDED

We took the Stryker and gave it a boost. With the Nitrous assist opening mechanism, one of your most cherished knives just got better. The Nitrous mechnism is built directly into the liners, which propels the blade open with ease. We also upgraded to more tactile G10 handle scales, thumb studs an an overall cool new look. The 912 and 913 deliver on what it means to be a Black Class knife.

Superior Quality D2 Tool Steel

Double Titanium Locking-Liners

G10 Textured Handle Scales

This Series has made to order configurations (Min 20pcs), which are 913BKD2, 913SD2. Please contact your local dealer/distributor to inquire about placing the minimum order.

Two Blade Style Options (See the Modified Tanto version, Model 912)

Nitrous Assist Opening Mechanism

Country of origin: USA

...........................................................................................................